Interlogix Motion Detector Batteries

1. Press the top tab to remove the sensor from the backplate.

Interlogix_Motion_1.jpg


2. Hold the top and bottom tabs, then pull to remove sensor from the front cover.

Interlogix_Motion_2.jpg


3. Remove and replace batteries, then reassemble, replacing the sensor onto the backplate.

Interlogix_Motion_3.jpg


4. Batteries are either 2 AA alkaline or 1 SAFT LS-14500 3.6-volt lithium.

AA batteries and SAFT LS-14500, dependent on system model


Line.png


1. Remove motion from backplate by inserting screwdriver into bottom slot.

Interlogix_Motion_4.jpg


2. Battery is SAFT LS14250 3.6 volt lithium battery.

Interlogix_Motion_5.jpg