Simon XT Motion Detectors—Battery Replacement

Find the image of your motion detector below to view instructions on how to complete your battery replacement. Due to the versatility of your panel, only commonly paired sensors are shown. If your specific sensor is unlisted, you can search for other sensors here. If you need further assistance, you can text a Support Representative any time at 469.513.8685.

Once you've replaced the batteries, the error on your panel should clear within one hour. If you would like to clear the error manually, click here for steps to clear an alert from your Simon XT panel. Otherwise, if you have a Simon XTi panel, click here for steps to clear trouble alerts.

Interlogix 60-807-95R Indoor Motion Detector:

Press top tab to remove the sensor from the backplate

Hold the top and bottom tabs, then pull to remove the sensor from the front cover

Remove and replace 2 AA batteries, attach front cover, then return the sensor to the backplate

Interlogix / GE / ITI 60-511 DS924i Motion Detector

Insert a screwdriver into the bottom slot to remove the motion sensor from the backplate

Remove and replace 1 SAFT LS14250 Lithium battery

If you need further assistance, you can text a Support Representative at 469.513.8685.