Interlogix Door/Window Sensor—Tamper Error

Find the image of your door/window sensor below to view instructions on how to replace the cover on your sensor to address the tamper error.

You will also need to clear the error from the panel memory. Once the cover has been replaced, see instructions for Simon XT - Silence Trouble Beeps or Simon XTi - Silence and Reset Alarm.

Interlogix 60-670-95R Door Window Sensor:

Align the cover over the sensor and press to close, ensuring the tab snaps into place.

2.01_Simon_Interlogix_60-670-95R_Door_Window_Sensor.jpg

Line.png

Interlogix 60-362N-10 Door Window Sensor:

Align the cover over the sensor and press to close, ensuring the latch locks into place.

2.02_Simon_Interlogix_60-362N-10_Door_Window_Sensor.jpg

Line.png

Interlogix 60-688-95 Micro Door Sensor:

Align the cover over the sensor, and press it down to secure it in place.

2.03_Interlogix_60-688-95_Micro_Door_Sensor.png

Line.png

Interlogix / GE Security TX-1012-01 Micro Door Sensor:

Press the inside cover onto the sensor, then align and press closed against the backplate.

1.04_Interlogix_-_GE_Security_TX-1012-01_Micro_Door_Sensor.png