How to Add a Z-Wave Device to the IQ Panel 4

Add Z-Wave Light Module

1. Press or swipe down the clock display at the top of the settings tray, then press Settings.

2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

3. Press Installation, then Devices.

4. Press Add Device, then Pair.

5. Press the Mate button on the light module.

6. The IQ Panel 4 should beep if successful, press Automation, select if the device turns on at Night or Evening, then press OK.

7. Press Name then select the pre-determined name or press Customer Description to create a name.

8. If a custom descriptor was selected, enter a custom name. Press the check or keypad icon.

9. Press the back arrow or home icon to exit.

Delete Z-Wave Light Module

1. Press or swipe down clock display at top for settings tray, then press Settings.

2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

3. Press Installation, then Devices.

4. Press Clear Device.

5. Press the Mate button on the light module.

6. If successful press OK then the back arrow or home icon to exit.

Programming A Z-Wave Door Lock

1. Press or swipe down the clock display at the top of the settings tray, then press Settings.

2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

3. Press Installation, then Devices.

4. Press Add Device, then Pair.

5. Remove the battery cover from the Kwikset lock and press the left button.

Schlage Deadbolt:

1. Enter the six-digit programming code provided in the Schlage documentation.

2. Press the SCHLAGE button then 0. The Schlage button flashes orange for a minute.

Kwikset Deadbolt:

Open the battery cover, press the left button, then wait for 2 minutes.

Yale Touchscreen Deadbolt:

1. Touch the screen with the back of your hand or fingers to activate.
2. Enter the 4 to 8-digit master code, then press #. The lock should sound a happy tone.
3. Press 7, then press # to enroll. The lock should sound a "Happy" tone.

4. If successful lock settings appear, press Name and select from pre-determined names or press Custom Name to enter your own name.

7. If custom name was selected press Custom Desc, enter a name, press the check or keypad icon, then press Add to save.

8. Press Add to finish, then press the back arrow or the home icon to exit.

Programming a CT100 Thermostat

1. Press or swipe down the clock display at the top of the settings tray, then press Settings.

2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

3. Press Installation, then Devices.

4. Press Add Device, then Pair.

5. At the thermostat, press the Menu button, "r1" displays and Mate appears under the antenna icon.

6. Press Mate again - MATE begins flashing.

7. If successful the thermostat displays Link under the antenna icon, then press the Menu button to exit.

8. The IQ Panel 4 beeps and displays device settings, press Name then select pre-determined name, or press Custom Name to create your own name.

9. If Custom Descriptor was selected press Custom Desc and enter a custom name, then press the check or keypad icon.

10. Press the back arrow or home icon to exit.

Adding Z-Wave Devices

1. Press or swipe down clock display at top for settings tray, then press Settings.

2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

3. Press Installation, then Devices.

4. Press Add Device, then Pair or Include.

5. Press the Learn or Pair button on the device.

Plug-in Lamp or Light/Appliance Module:

Double click the Mate button.

IQ Siren:

Press the button at the bottom of the siren.

In-Wall Dimmer or On/Off Light Switch:

Turn the light switch on and off.

In-Wall Outlet:

Double click the button in the middle of the outlet.

Thermostats

GE Basic Thermostat:

Remove the top cover, then press the MATE button.

Radio Thermostat CT30, CT100 and CT101:

1. Press the thermostat Menu button - "r1" displays and Mate appears under the antenna icon.

2. Press the Mate button again. Mate begins flashing on screen.

3. If successful the thermostat displays Link under the antenna icon, then press the Menu button to exit.

Trane Remote Energy Management Thermostat:

1. Press the left button twice, scroll down to Z-Wave install, and press Select. Then select Yes.

2. The IQ Panel 4 should beep if successful, press Name, then select the pre-determined name or press Custom Description to create a name.

3. If custom description was selected, enter custom name, then press the check or keypad icon.

4. Press the back arrow or the home icon to exit.

Qolsys IQ Panel 4 - LiftMaster Garage Door Installation

Step 1: Install the 888LM MyQ Control Panel

1) Disconnect all electrical power to the garage door opener.

2) Remove the existing door control from the wall.

3) Note the polarity of the wires connected to the existing door control. Label the wires appropriately (Red/White).

4) Disconnect the wires from the existing door control.

5) Connect the wires to the new MyQ Control Panel.

6) Mount the MyQ Control Panel to the wall.

7) Reconnect power. The yellow command LED and the red learn LED should quickly blink for up to 5 minutes as the MyQ Control Panel recharges.

8) Test the MyQ Control Panel. Press the push bar to activate the garage door opener.

10) Connect to LiftMaster Internet Gateway (See instructions below).

Step 2: Connect LiftMaster Internet Gateway

1) Connect ethernet cable to router and the internet gateway.

2) Connect power to the internet gateway.

3) When the internet gateway connects to the internet, the green light will stop blinking and will light solid. If the green light does not light solid, check the power, router, and internet connections to the internet gateway.

4) Write down the serial number on the gateway to be used in the registration process.

Step 3: Register Internet Gateway

Note: You cannot register the Internet Gateway through the Brinks Home App if it is already registered through MyQ/LiftMaster. You must delete the Internet Gateway from your MyQ account before attempting to register it to your Brinks Home App.

1) Log in to your Brinks Home app by using your login credentials.

2) Access garage door registration through your Equipment menu, Z-Wave tab, Garage option.

3) Follow the instructions to add a gateway.

4) Enter the serial number of the Gateway and continue.

5) Select Add New Device to put the Gateway into learn mode.

6) Perform either of the two scenarios listed below:

• Scenario #1: After the yellow light is on at the internet gateway, go to the MyQ Control Panel (888LM) and push the learn button twice. The LED on the gateway will turn blue once the device is learned in.

• Scenario #2: After the yellow light is on at the internet gateway, enter menu > program > MyQ device on the Control Panel (e.g. 880LM). The LED on the gateway will turn blue once the device is learned in.

8) Return to the Garage page and click Check for New Devices.

9) Repeat steps 6-8 if initially unsuccessful. Also check the model number of your garage door against the complete list of compatible garage door openers, linked below, and make sure the garage door is compatible.

LiftMaster MyQ Garage Door Programming

Identifying the Components:

The 888LM is the Control Panel mounted on a wall usually by the inside garage door.

The Gateway links the MyQ Garage Door opener to the Internet Router by Wi-Fi.

Compatibility:

Any LiftMaster or Chamberlain garage door opener with integrated MyQ technology.

There are two types of protocol compatible with the gateway:

A. Security +

If the MyQ logo is not on the opener, there should to be a purple learn button. You will have to use the LiftMaster control panel in this case.

B. Security + 2.0

There will be a control panel included with the opener, which will have a "Learn" button.

Connecting the Control Panel to the Garage Opener:

1) Connect the red and white wires to the control panel.

2) Wait till the control panel finishes charging. When it's done, the yellow LED will remain illuminated. The door can be tested by simply pressing the push button at the center.

Note: Control panels used with Security + 2.0 garage door openers do not have to charge.

Setting Up the Gateway Device through the Brinks Home App website:

1) Connect Gateway to router by Ethernet cable, then power up and wait until the Green LED turns on solid.

2) Add the Gateway by selecting Get Started.

3) Enter the Gateway serial number and the account will attempt to connect with the device.

Learning Control Panel(s) to the Gateway Device:

1) Enable Learn Mode on the gateway. This will cause the yellow LED on the gateway to turn on.

2) Press the Learn button on the control panel. When this connects to the Gateway the blue LED on the Gateway turns on.

LiftMaster Compatible Garage Door Openers

Drive	1997-2004	1997-2004	2005-2006	2007-present
Chain	1240R
Chain	1245R		1345
Chain/DS	1246R (DS)		1346 (DS)
Chain	1255R		1355
Chain/DS	1256R (DS)		1356 (DS)
Chain		2245	3245
Chain	1265	2255	3255
Chain		2265	3265
Chain		2565
Chain	ATS211R	ATS211X	ATS2113X
Chain		2575	3575
Chain/DS		2595 (DS)	3595 (DS)	3895T
Belt		2280	3280
Belt		2585	3585	3885T
24VDC Belt	2500(B)	2500D	3500
12VDC Unit			3850	3850T
RJO - 24VDC			3800	3800T
Screw	1000SDR	2110	3110	3240
Screw	2000SDR	2220	3220	3130

Drive	1997-2004	2004	2004	2007-present
Chn/Cble	1200
Chn/Cble	CG40	CG40S	CG40D	HD200D
Chn/Cble	2200	CG42CS	CG42D	HD200DM
Chn/Cble	PD100	7520S	7520D	HD400D
Chn/Cble	PD200 / PD210	PD210CS		HD400DM
Chn/Cble	PD600 / PD212	PD212C		248730
Chn/Cble	4200		PD210D	248735
Chn/Cble	6200		PD212D
Chn/Cble	PD610	PD610S	PD610D
Chn/Cble	PD612K	PD612S
Chn/Cble	7220 / 7320		PD612D
Chn/Cble	7420	PD752S	PD752D
Chn/Cble		PD758S	PD758D
Belt	8200		WD822D	HD600D
Belt	9200 / 9500		WD922D	248739
Belt	WD822K	WD822S	WD832D
Belt	WD922K	WD922S
Belt	WD912K	WD912KS
24VDC Belt		WD952S	WD952D	248754
12VDC Unit			WD962D	HD900D
Screw	4620 / 4650DI	PD420	PD420/422D	995XDM
Screw	4640 / PD460	7902	PD462D	9950D
Screw	9902 / PD420	9950/9960	9950D

	1997 - 2005	1997 - 2005	2005+
Chain Drive	Sec+ - 390M hz	Sec+ - 390M hz	Sec+ - 315M hz
Units	139.18050.
	139.18051
	139.18052
	139.18053
	139.18057
	139.18058
	139.18059
	139.18060.
	139.18063
	139.18070.
	139.18076
	139.18086
	139.18096	139.18978
	139.18450.		139.18450D
	139.18451		139.18451D
	139.18452		139.18452D
	139.18453		139.18453D
	139.18458		139.18458D
	139.18470.		139.18470D
	139.18473		139.18473D
	139.18475
	139.18525
	139.18555		139.18555D
	139.18595
DC Units	139.18400.
Belt Drive	139.18479	139.18887
Units	139.18489	139.18897	139.18489D
	139.18585	139.18979	139.18585D
	139.18679	139.18987
	139.18687

	1997 - 2005	2005+
Chain/Cable	Sec+ - 390M hz	Sec+ - 315M hz
Drive	139.53661	139.53648D
Units	139.53662
	139.53670
	139.53671
	139.53672
	139.53673
	139.53674
	139.53675
	139.53677
	139.53910	139.53910D
	139.53959srt
	139.53961
	139.53962
	139.53966
	139.53974
	139.53975
	139.53976
	139.53977srt
	139.53978
	139.53982
	139.53985	139.53985D
	139.5398511
	139.53989
	139.53990	139.53990D
	139.5399011
	139.53995
		139.53997D
Screw Drive	139.53663
Units	139.53927
	139.53963
	139.53965srt
	139.53991
	139.53992	139.53992D
	139.5399211
		139.53930D
Screw Drive	139.53924
Belt Drive	139.53664
Units	139.53914	139.53914D
	139.53954
	139.53964
	139.53984srt
DC Units		139.53918D
	139.53919	139.53919D