Qolsys Motion Detectors—Battery Replacement

Find the image of your motion detector below to view instructions on how to complete your battery replacement. Due to the versatility of your panel, only commonly paired sensors are shown. If your specific sensor is unlisted, you can search for other sensors here. If you need further assistance, you can text a Support Representative any time at 469.513.8685.

Once you've replaced the batteries, the error on your panel should clear within one hour. If you would like to clear the error manually, click here.

Qolsys QS1230-840 Motion Detector:

Press bottom tab to remove sensor from backplate, then remove and replace 2 AAA batteries.

001b-c QS1230-840 Motion Latch and Batteries


Interlogix 60-807-95R Indoor Motion Detector:

1. Press top tab to remove sensor from backplate.

002a-b-c- 60-807-94R Motion Latch and Battery Compartment Interlogix

2. Hold top and bottom tabs then pull to remove sensor from front cover.

003a-b-c- 60-807-94R Motion Tabs Battery and Case Interlogix

3. Remove and replace 2 AA batteries, attach front cover, then return sensor to backplate.

004a-b 60-807-94R Motion New Battery and Case Restoration Interlogix

For additional devices not shown, click here to search for your motion detector by name or you can text a Support Representative any time at 469.513.8685.