GC2 GoControl - Rediscover Z-Wave Network

It is recommended when adding or deleting Z-Wave devices, to run a rediscover on the Z-Wave networ. This finds the most efficient path for devices to communicate on the Z-Wave network.

1. Press Services, then press the Z-Wave logo button.

rediscover1.png rediscover2.png


2. Press the wrench icon on the bottom right of the screen, then enter the default installer code 1561.

rediscover3.png rediscover4.png


3. Press Advanced Toolbox, then press Rediscover Network.

rediscover5.png rediscover6.png


4. Rediscovering may take up to a minute. When finished, press Back to exit.

rediscover7.png rediscover8.png