2GIG Glassbreak Detectors—Battery Replacement

Find the image of your glassbreak detector below to view instructions on how to complete your battery replacement. Due to the versatility of your panel, only commonly paired sensors are shown. If your specific sensor is unlisted, you can search for other sensors here. If you need further assistance, you can text a Support Representative any time at 469.513.8685.

Once you've replaced the batteries, the error on your panel should clear within one hour. If you would like to clear the error manually, click here.

2GIG-GB1E-345 Glassbreak Detector

Twist counter-clockwise to remove from the base, then remove and replace 2 CR123A Lithium batteries

Brinks Home Security Glassbreak Sensor Opening

2GIG Glassbreak GB1E-345 Detector Battery Replacement Video


Honeywell 5853 Glassbreak Detector

Flip down the front cover, then remove and replace 2 CR123A Lithium batteries



Honeywell 5852 FlexGuard Glassbreak Detector

Open the sensor door, then remove and replace the 9 Volt Lithium battery



Interlogix RE609 Glassbreak Detector

Using a screwdriver, pry the cover from the sensor, then remove and replace 2 CR123A 3-Volt Lithium batteries

001b.png 002b.png