How to Program a Glassbreak Detector to the IQ Panel

1. Select the settings icon in the lower left corner of the panel, then enter the default installer code 1111 or 2222.

  

2. Select Installation.

3. Select Security Sensors.

4. Select Auto Learn Sensor.

5. Trip the sensor for the IQ Panel to learn the device.

6. Once this is done, the IQ Panel will beep and ask if you want to add the device to your sensor list. Select Ok.

7. Here you will need to program the proper information for this device.

Sensor Information:

• • Sensor DL ID: Don't touch this option.
• • Sensor Type: Select gLASSBREAK.
• • Sensor Name: Select an appropriate name or create a custom description
• • Chime Type: This allows you to apply a specific sound to your device
• • Sensor Group: set this to 13
• • Voice Prompts: Leave this alone

8. When ready, select Add.