Simon XTi - Adding Z-Wave Devices

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press ADD DEVICE to start learning process

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

Plug-in Lamp or Light/Appliance Module

Double click the Mate button

Z-Wave_Mate_Button_2.jpg

IQ Siren

Press the button at the bottom of the siren.

IQ_Siren_Learn_Button.jpg

In-Wall Dimmer or On/Off Light Switch
Turn the light switch on and off

Picture4.png

In-Wall Outlet
Double click the button in the middle of the outlet.

final_nueve.jpg

Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

hero_01.png

Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt:

  1. Touch the screen with the back of your hand or fingers to activate.
  2. Enter the 4 to 8-digit master code, then press #. The lock should sound a happy tone.
  3. Press 7, then press # to enroll. The lock should sound a "Happy" tone.

0008a_0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut

Line


GE Basic Thermostat
Remove top cover then press the MATE button

Radio_Thermostat_CT20.jpg

Radio Thermostat CT30, CT100 and CT101

1. Press the thermostat MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_Learn_01_Press_Menu.jpg Radio_Thermostat_CT100_Learn_02_Press_Mate.jpg

2. Press MATE button again, MATE begins flashing

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

3. If successful the thermostat displays LINK under antenna icon, press the MENU button to exit

Radio_Thermostat_CT100_Learn_03_Mate_Flashes.jpg

Trane Remote Energy Management Thermostat

Press the LEFT button twice then scroll down to Z-WAVE INSTALL and press SELECT then YES

final_2.jpg final_cuatro.jpg

5. Once added the Simon XTi beeps and displays "Device xx added", press CLOSE to exit

Z-Wave_Add_04_Added.png

6. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

7. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg