How to Remove a Z-Wave Siren from the Simon XTi

1. Press the gear icon at the bottom right then press the down arrow several times.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press Enter by Programming, then enter your master code.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press Interactive Services, then press Remove Device.

Interactive_Services_01_Main_Select.jpg Z-Wave_Delete_01.png

4. The Simon XTi enters Z-Wave delete mode.


5. Press the Program Button until you hear the Simon XTi beep.


6. After a few seconds the Simon XTi will beep and show Device deleted. Press Close to exit.


7. Press Close twice to exit Z-Wave and Interactive Services menus.

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press Close again to exit programming.

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg