Close
Close
Help Center Simon XTi - Updating The Thermostat

Simon XTi - Updating The Thermostat

If your Thermostat is not showing up on the Simon XTi or Alarm.com then you may need to update it on your panel.

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press UPDATE 2WTTS then THERMOSTATS

Update_2WTTS_01_Z-Wave_Menu.png Update_2WTTS_02_Update_Menu.png

5. Press UPDATE, when finished press CLOSE to exit

Update_2WTTS_03_Thermostat_Menu.png Update_2WTTS_04_Updating.png

6. Press CLOSE twice to exit

Update_2WTTS_05_Close_Thermostat_Menu.png Update_2WTTS_06_Close_Update_Menu.png

7. Press CLOSE to exit Z-Wave Menu then Interactive Services

Update_2WTTS_07_Close_Z-Wave_Menu.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Related Articles

Contact Support