Simon XTi—Add User Code

The Simon XTi supports up to 8 additional user codes

1. Press bottom right GEAR icon then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER button by Programming then enter Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press ACCESS CODES then press box by empty User Code

Access_Codes_00.jpg Add_Code_01.jpg

4. Enter new User Code then press SAVE then CLOSE to exit

Add_Code_02.jpg Add_Code_03.jpg

5. Press CLOSE again to exit programming

Exit_Programming_01_Exit.jpg Main_Screen.jpg