Simon XTi - Add Z-Wave Light Module

1. Press bottom right GEAR icon then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER button by PROGRAMMING then enter Master Code then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press ADD DEVICE to start learning process

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

5. Press light module MATE button, Simon XTi beeps, displays Device xx added, press CLOSE

Z-Wave_Mate_Button.jpg Z-Wave_Add_04_Added.png

6. Press CLOSE several times to exit programming

Z-Wave_Add_05_Advanced_Menu_Exit.png Main_Screen.jpg