GC3 - Remove Z-Wave Device

The below steps will walk you through removing an existing Z-Wave device from the GC3 (2GIG GoControl 3) Panel. Please note that some Z-Wave devices require 24 hours to update before they can be added back.

1. Press System Settings, enter the default installer code 1561, then select Smart Home Settings.

d001_image.png d002_image.png d003_image.png

2. Press Remove Devices, then press the mate button on your Z-Wave device to remove it.

d004_image.png d005_image.png d006_image.jpg

3. Press the home button to exit.