Simon XTi - Program an Image Sensor

1. Press settings gear, the down arrow several times.

Picture1.png Picture2.png


2. Press Enter by System Programming, then enter the default installer code 4321.

Picture3.png Picture4.png


3. Press Sensors, then press Learn Sensor.

Picture5.png Picture6.png


4. Pull the motion detector up away from the backplate, then remove and return the batteries to learn.

Picture7.png Picture8.jpg


5. The Simon XTi beeps when successful. Press Edit next to Sensor Group, enter 17, then press Save.

Picture9.png Picture10.png


6. Press Edit by Sensor Name, then press Edit by word.

Picture11.png Picture12.png


7. Scroll words with the arrow buttons, select and press Save, then press Close to exit.

Picture13.png Picture14.png