Simon XTi—Glassbreak Detector Installation

1. Press settings gear, then press the down arrow several times.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg


2. Press Enter by Programming, enter the default installer code 4321, then press Ok.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg


3. Press Sensors then Learn Sensor.

Programming_-_Learn_Sensor_01.png Programming_-_Learn_Sensor_02.png


4. Remove the sensor's cover to learn. If successful, the Simon XTi beeps and displays the sensor information.

Programming_-_Learn_Sensor_03.png Programming_-_Learn_Sensor_04.png

2.png


5. Press Edit by Sensor Group, enter 13, then press Save to exit.

Programming_-_Learn_Sensor_04b_Sensor_Group.png Edit_Sensor_Group.jpg


6. Press Edit by Sensor Name then press Edit by the 1st, 2nd, or 3rd words.

Programming_-_Learn_Sensor_04c_Sensor_Name.png Programming_-_Learn_Sensor_07_Sensor_Name.png


7. Scroll words with arrow buttons, press to select each word, press Save, then press Close to exit.

Programming_-_Learn_Sensor_08_Sensor_Name_List_1.png Programming_-_Learn_Sensor_07a_Sensor_Name_Exit.png


8. Press Close several times to exit programming.