Simon XTi—Add Z-Wave Device

1. Press the gear icon at the bottom right, then press the down arrow several times until you arrive at Programming.

2. Press Enter besides Programming, then enter your master code.

3. Press Interactive Services, then press Z-Wave.

4. Press Add Device to start the learning process.

5. On your thermostat, press the Menu.

6. Press Mate twice. The icon begins flashing, then Link appears if successful.

7. Simon XTi beeps if successful, press Close to exit.

8. Press Close to exit the Z-Wave menu, then press Close again to exit the Interactive Services menu.

9. Press Close again to exit programming.