Simon XTi - Sensor Name Programming

1. Press the settings gear, then press the down arrow several times.

Interface001.jpg Enter_Programming_02_Settings.jpg


2. Press Enter by Programming, enter the default installer code 4321, then press Ok.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg


4. Press Sensors, then press Edit Sensor.

sensors.png edit_sensor_2.png


5. Press Edit by sensor, then press Sensor Name.

Programming_-_Edit_Sensors_02.png Programming_-_Edit_Sensors_03.png


6. Press Edit by word, select each word from list, then press Save to exit.

Programming_-_Sensors_06.png Programming_-_Sensors_07.png


7. Press Close several times to exit programming.

Programming_-_Sensors_08.png