How to Remove a Z-Wave Device from the Simon XTi

1. Press the gear icon at the bottom right then press the down arrow several times until you reach programming.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg


2. Press Enter by Programming then enter your master code.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg


3. Press Interactive Services, then press Remove Device.

Interactive_Services_01_Main_Select.jpg Z-Wave_Delete_01.png


4. The Simon XTi enters Z-Wave delete mode.

Z-Wave_Delete_02.png


5. On your thermostat, press Menu.

Smart Home Thermostat Pairing with GC2/GC2e Home Security Panel


6. Press the Mate icon twice which begins flashing, then link turns off.

smart home Brinks Home Security thermostat linking


7. After a few seconds the Simon XTi beeps and shows device deleted. Press Close to exit.

Z-Wave_Delete_03.png


8. Press Close twice to exit the Z-Wave menu and the interactive services menu.

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png


9. Press Close again to exit programming.

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg