Simon XTi - Adding Trane Thermostats

1. Press the gear icon at the bottom right, then press the down arrow until you reach programming.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press Enter next to programming, then enter your master code.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press Interactive Services, then press Z-Wave.

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press Add Device to start the learning process.

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

5. On the thermostat press the Menu button, then scroll down to Z-Wave install, then press Select.

Brinks Home Security System Z-Wave Learn Brinks Home Security System Z-Wave Learn 2

6. Press select Yes or No, then press Done to exit.

Brinks Home Security System Z-Wave Learn 3 Brinks Home Security System Z-Wave Learn 4

7. Simon XTi beeps if successful, then press Close to exit.


8. Press Close to exit Z-Wave menu and interactive services menu.

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

9. Press Close again to exit programming, completing the process.

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg