How to Program a Z-Wave Siren to the Simon XTi

1. Press the gear icon at the bottom right, then press the down arrow to scroll down several times.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg


2. Scroll down to Programming and press Enter, then enter your master code.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg


3. Press Interactive Services, then press Z-Wave.

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png


4. Press Add Device to start the learning process.

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png


5. Press the Program Button on the siren twice until the Simon XTi beeps.

22.JPG


6. The Simon XTi displays Device xx added. Press Close to exit.

Z-Wave_Add_04_Added.png


7. Press Close to exit the Z-Wave and Interactive Services menus.

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png


8. Press Close again to exit programming.

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg