IQ Panel - Delete Z-Wave Device

Follow the steps below to delete a sensor if the device is lost or defective.

1. Press Settings, then enter the default installer code 1111 or 2222.

Enter_Programming_01.png Enter_Programming_02.png

2. Press Installation, then press Home Control Devices.

Settings_Main_-_Installer.png 01_Installation_Main.png

3. Press Remove Device from Panel, then press to select the device to delete.

02_Home_Control_Devices_Main.png Delete_Device_01_List.png

4. Press Delete, then press Ok to confirm.

Delete_Device_02_List_Device_Checked.png Delete_Device_03_Confirm_Delete.png

5. Press Back or Home to exit.

Delete_Device_04_Exit.png Home_Button.jpg