Simon XT - Delete Z-wave Devices

1. Hold * for 10 seconds for Z-Wave menu


2. Hold 2 for 10 seconds


3. Simon XT enters Z-Wave delete mode

Simon_XT_Z-Wave_Delete_01.png Simon_XT_Then.jpg Simon_XT_Z-Wave_Delete_02.png

Plug-in Lamp, Light or Appliance Module

Double Click Mate button


In-Wall Dimmer or On/Off Light Switch
Turn light switch on and off


In-Wall Outlet
Double click button in middle of outlet


Schlage Deadbolt
1. Enter 6-digit Program Code provided in the Schlage documentation

2. Press SCHLAGE logo or button then press 0


Kwikset Deadbolt
Open battery compartment cover and press SmartCode button


Yale Touchscreen Deadbolt:

  1. Touch the screen with the back of your hand or fingers to activate the lock.
  2. Enter the 8-digit master PIN code, then press the gear icon. The lock should play a happy tone.
  3. Press 7, then press the gear icon again, and another happy tone will sound.
  4. Press 1, then press the gear icon, triggering a third happy tone and exit.
  5. Door_Lock_10.jpg

Line ADC-T2000

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear


2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display

T2000_Setup_03.jpg ADC-T3000

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2. Press ENTER button to select then press DOWN ARROW until NETWORK

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit


Radio Thermostat CT-20 or GE Basic Thermostat
Remove top cover then press MATE button


Radio Thermostat CT30, CT100 and CT101

1. Press MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_01.jpg Radio_Thermostat_CT100_01.jpg

2. Press LINK under antenna which flashes, if successful MATE appears, press MENU to exit

Radio_Thermostat_CT100_Link.jpg Radio_Thermostat_CT100_01.jpg

Radio Thermostat CT110

Press left side Antenna button


GoControl or RCS Technologies TBZ-48

1. Hold FAN button 5 seconds until SETUP then press UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpg GoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to Delete

GoControl_Thermostat_Learn_03.jpg GoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit


Trane Remote Energy Management Thermostat

Press LEFT button twice then scroll to Z-WAVE INSTALL and press SELECT button


IQ Thermostat

Hold HOME button for 2 seconds until "NOC" then press PROGRAM button until "Srh"


Thermostat displays "done" if successful press Home button to exit

3.png 4.png

4. Simon XT beeps and displays "Device Deleted" and number of devices in memory

Simon_XT_Z-Wave_Delete_03.png Simon_XT_Then.jpg Simon_XT_Z-Wave_Add_01.png

5. Hold # for 10 seconds to exit