How to Add a Z-Wave Device to the Lynx Touch

1. Press AUTOMATION then TOOLS

Ready_To_Arm.jpg Tools_00.jpg

2. Press INCLUDE DEVICES to begin Z-Wave device enrollment

Tools_Add_00.jpg Tools_Add_01.jpg

3. Set Z-Wave device to learn mode

GE Jasco Light Appliance Module

Double click MATE / LEARN button

Z-Wave_Mate_Button_2.jpg

Line.jpg

GE Jasco Wall Dimmer Lght Switch

Turn on and off light switch.

Picture4.png

Line.jpg

GE Jasco Wall AC Outlet

Double click button in middle of outlet.

final_nueve.jpg

Line.jpg

Schlage Lever Lock or Deadbolt

1. Enter 6-digit programming code provided in documentation from Schlage

2. Press Schlage logo or button then press 0 then wait 2 minutes to learn

Door_Lock_19.jpg

Line.jpg

Kwikset Deadbolt

Open battery cover, press left SmartCode button then wait 2 minutes to learn

final_diez_2.jpgfinal_diez.jpg

Line.jpg

Yale Touchscreen Deadbolt

1. Touch screen with the back of your hand or fingers to activate

2. Enter 4-8 digit Master PIN Code then press Gear_Icon.jpg

3. Press 7 then Gear_Icon.jpg

4. Press 1 then Gear_Icon.jpg then wait 2 minutes for the lock to learn

Door_Lock_10.jpg

Line.jpg

2GIG GoControl TBZ-48

1. Hold FAN button 5 seconds until SETUP then press UP ARROW button until ZWAVE

GoControl_Thermostat_Learn_01.jpg GoControl_Thermostat_Learn_02.jpg

2. Press MODE button to select then press MODE button again to learn

GoControl_Thermostat_Learn_03.jpg GoControl_Thermostat_Learn_04.jpg

3. If successful press FAN button to exit, antenna icon appears by temperature display

GoControl_Thermostat_Learn_05.jpg GoControl_Thermostat_Learn_06.jpg

Line.jpg

Alarm.com ADC-T2000 Thermostat

1. Press MODE button to display temperature, press MODE until heat/cool icons disappear

T2000_Setup_03.jpg T2000_Setup_02.jpg

2. Hold DOWN ARROW until Radio Wave Icon appears below temperature display

T2000_Setup_03.jpg

Line.jpg

Alarm.com ADC-T3000 Thermostat

1. Press MENU button to display Menu then press DOWN ARROW until SETTINGS

Alarm.com_ADC-T3000_Learn_00.jpg Alarm.com_ADC-T3000_Learn_01.jpg

2. Press ENTER button to select then press DOWN ARROW until NETWORK

Alarm.com_ADC-T3000_Learn_02.jpg Alarm.com_ADC-T3000_Learn_03.jpg

3. Press ENTER button to select then press UP or DOWN ARROW to highlight ADD

Alarm.com_ADC-T3000_Learn_04.jpg Alarm.com_ADC-T3000_Learn_05b.jpg

4. Press ENTER button to select and start Z-Wave learn mode

Alarm.com_ADC-T3000_Learn_05.jpg Alarm.com_ADC-T3000_Learn_06.jpg

5. Learning may take up to 1 minute to complete and exit

Alarm.com_ADC-T3000_Learn_07.jpg

Line.jpg

Honeywell T6 Thermostat

Honeywell_T6_Thermostat.jpg

1. Press Menu then press right arrow until Z-Wave Setup then press Select

Honeywell_TH6320ZW2003_T6_Thermostat_Learn_1.jpg

2. Press Select at the Include screen to learn

Honeywell_TH6320ZW2003_T6_Thermostat_Learn_2.jpg

Line.jpg

Honeywell 8320Z1000 Thermostat

Honeywell_TH8320ZW1000_Front.jpg

1. Press SYSTEM then hold bottom buttons together until screen changes

Honeywell_TH8320_Z-Wave_Programming_1.jpg Honeywell_TH8320_Z-Wave_Programming_2.jpg

2. Press Arrow buttons until "rF20" then press Arrow buttons to change 0 to 1

Honeywell_TH8320_Z-Wave_Programming_3.jpg Honeywell_TH8320_Z-Wave_Programming_4.jpg

3. Thermostat enters Z-Wave enrollment, when finished press DONE to exit

Honeywell_TH8320_Z-Wave_Programming_5.jpg Honeywell_TH8320_Z-Wave_Programming_6.jpg

Line.jpg

Radio Thermostat CT-20 and GE Thermostat
Pull top cover toward you to remove then press MATE button to learn

Radio_Thermostat_CT20_Learn_2.jpg

Line.jpg

Radio Thermostat CT30, CT100, CT101

Radio_Thermostat_CT30_Front.jpg

1. At thermostat press MENU button, "r1" displays and MATE appears under antenna icon

Radio_Thermostat_CT100_02.jpg Radio_Thermostat_CT100_01.jpg

2. Press MATE, which begins flashing, if successful LINK appears, press MENU to exit

Radio_Thermostat_CT100_04.jpg Radio_Thermostat_CT100_Link.jpg

Line.jpg

Radio Thermostat CT110

Press left side Antenna button

Radio_Thermostat_CT110.jpg

Line.jpg

Trane TZ43 / TZ45 Thermostat

Trane_TZ45_Front_1.jpg

1. Press MENU button then press Scroll Down button to ZWave Install then press SELECT

Trane_TZ45_Learn_01.png Trane_TZ45_Learn_02.png

2. Press Scroll Up button for Yes to start Z-Wave enrollment

Trane_TZ45_Learn_03.png Trane_TZ45_Learn_04.png

3. If successful display exits to main menu, press DONE button to exit

Trane_TZ45_Learn_05.png

Line.jpg

Linear GoControl Garage Door Controller

Press the side MATE button, controller flashes then sounds 1 beep then 3 beeps

Garage_Door_10_Linear_Mate_Button.jpg

4. If successful press BACK ARROW or the HOME button to exit

Tools_Add_02.jpg Tools_Add_03.jpg