ADC-V724 Outdoor Video Camera Guide

Specifications

  • • 1920 x 1080 pixel video resolution
  • • 117° field of view
  • • 45' infrared night-vision range
  • • MicroSD card slot
  • • Wi-Fi with two-way audio
  • • 12V – 1A DC power adapter (included)
  • • Operating temperature -4°F – 122° F ( -20°C – 50°C)

ADC-V724.png

Features

  • • Two-way audio to hear and speak with visitors
  • Perimeter Guard
  • • Microphone and speaker
  • • Video analytics for smarter detection and relevant alerts
  • • Onboard recording with Smart View for continuous, local, encrypted recordings
  • • High dynamic range (HDR)
  • • Wi-Fi (2.4 or 5 GHz)
  • • Audio included in recorded clips for additional awareness
  • • Works with the Brinks Home™ Mobile App
  • • Improved mount for long-term stability
  • • Easier access to microSD card door

724_and_audio.png


Factory Default

Warning: erases everything, the camera must be re-added to your account.

To reset the camera to factory default, hold the reset button for 10 seconds.

ADC-V724 Under WPS Button


Wi-Fi Setup by WPS Enrollment

This brief instructional video demonstrates how to successfully pair the Brinks Home Outdoor Camera (ADC-V723) to a router using WPS mode:


Step-by-Step Instructions:

1. Hold the reset button for 3 seconds until the front LED flashes blue.

ADC-V724 WPS Mode Blue Light) 2.0


2. Press and release the router's WPS button or enable WPS in router programming.

Router_WPS_Button_adjusted_.png


3. The LED on the camera may turn red during this step. Wait 2 minutes for the camera LED to flash then turn solid green if successful.

ADC-V723_Outdoor_Camera_Green_Light.jpg


Note: If WPS mode fails, try Access Point mode.


Wi-Fi Setup by Access Point

This brief instructional video demonstrates how to successfully pair the Brinks Home Outdoor Camera (ADC-V723) to a router using Access Point (AP) mode:


Step-by-Step Instructions:

1. Hold the reset button for 6 seconds until the front LED flashes white to begin AP mode. This will also happen automatically after powering up the camera.

ADC-V724 AP Mode (White Light) 2.0


2. Go to smartphone Wi-Fi settings and find ADC-V723 (xx:xx:xx) then press Connect.

Access_Point_01_WiFi_Smartphone.png Access_Point_02_WiFi_Connect.png Access_Point_03_WiFi_Connected.png


3. In a web browser, go to http://v723install/ then press Scan for Wi-Fi networks.

Access_Point_04_Find_Out_IP_Address.png Access_Point_05_Enter_IP_Address_in_Browser.png Access_Point_06_Connected_Press_Scan.png


4. Select Wi-Fi network, scroll up and enter your Wi-Fi credentials, press Submit, then OK.

Access_Point_07_Select_WiFi_Network.png Access_Point_08_Enter_Encryption.png Access_Point_09_Finished.png


5. Camera LED turns green if successful or red if failure.

ADC-V723_Outdoor_Camera_Green_Light.jpg


Add Camera using the Brinks Home™ App Website

Note: The camera must first be connected to Wi-Fi.

  1. Log in to the Brinks Home App on a desktop browser, and press Video.

001_Brinks_Home_App__Desktop__Home.png


  1. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png


  1. Scroll to the bottom of the page and select Add Video Device.

003_Brinks_Home_App__Desktop__Video_Settings.png


  1. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png


  1. The camera is added to the network, which can take several minutes.

005_Brinks_Home_App__Desktop__Cam_Configuration.png


  1. When finished, select Live View to view images from a newly installed camera.

006_Brinks_Home_App__Desktop__Complete.png


Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

Video Instructions:


Step-by-Step Instructions:

  1. Log in to the Brinks Home Mobile App, and press Video.

001a_Mobile_App_Home_Clean.jpg001b_Mobile_App_Menu_Clean.jpg


  1. Select Settings by pressing the gear icon in the upper right-hand corner.

002a_Mobile_App_Video-Gear_Clean.jpg


  1. Select Add Video Device, then select your compatible device type.

003a_Mobile_App_Add-Video_Clean.jpg003b_Mobile_App_Select-Device_Clean


  1. The camera should be detected. Enter the camera name, then select Next.

004a_Mobile_App_Name_Device_Clean.jpg


  1. The camera may take several minutes to configure.

005a_Mobile_App_Connect_Device_Clean.jpg005b_Mobile_App_Verify_LED_Clean.jpg


  1. When finished, select Live View to view images from a newly installed camera.

006a_Mobile_App_Live_View_Clean.jpg



Once you add your camera, you may wish to set up recording rules. Click here for instructions.


Troubleshooting

  • Power cycle the camera by unplugging and plugging in power adapter.
  • Move closer to Wi-Fi router.
  • If issues persist, try resetting camera to factory defaults and reinstall.

LED Reference Guide

  • • Off - no power
  • • Flashing red - power on, camera booting
  • • Flashing green - local network connection
  • • Solid green - internet and Alarm.com connection
  • • Flashing blue - WPS enrollment mode enabled
  • • Flashing white - Wi-Fi access point mode
  • • Solid red - no local or Internet connection

For additional information relating to your device, click the following link to view the original manufacturer's user guide or installation manual: ADC-V724 Outdoor Camera Manual