DSC26103 In-Wall Switch—Resolving a Malfunction

Resolving Errors on a New Device:

If this error occurs on a newly installed device, it is usually an indication that the Z-Wave device is too far from the panel to maintain a signal.

Determine if a signal extender may be your best option. Most Z-Wave devices that plug into a power outlet can be used to relay a Z-Wave signal.

Resolving Errors on a Pre-Existing Device:

If the error occurs on a device that has been installed for a long time, there may be a defect warranting reinstallation.

Learn how to install the DSC26103 in-wall switch here: DSC26103 In-Wall Switch Guide.

You will also need to clear the error from the panel memory. Select your panel below to view instructions:

Qolsys:


2GIG:


Interlogix: